Router API

Router public API

vshard.router.bootstrap()¶

Perform the initial cluster bootstrap and distribute all buckets across the replica sets.

Параметры:	timeout – a number of seconds before ending a bootstrap attempt as unsuccessful. Recreate the cluster in case of bootstrap timeout. if_not_bootstrapped – by default is set to false that means raise an error, when the cluster is already bootstrapped. True means consider an already bootstrapped cluster a success.

Example:

vshard.router.bootstrap({timeout = 4, if_not_bootstrapped = true})

Примечание

To detect whether a cluster is bootstrapped, vshard looks for at least one bucket in the whole cluster. If the cluster was bootstrapped only partially (for example, due to an error during the first bootstrap), then it will be considered a bootstrapped cluster on a next bootstrap call with if_not_bootstrapped. So this is still a bad practice. Avoid calling bootstrap() multiple times.

vshard.router.cfg(cfg)¶

Configure the database and start sharding for the specified router instance. See the sample configuration.

Параметры:	cfg – a configuration table

vshard.router.new(name, cfg)¶

Create a new router instance. vshard supports multiple routers in a single Tarantool instance. Each router can be connected to any vshard cluster, and multiple routers can be connected to the same cluster.

A router created via vshard.router.new() works in the same way as a static router, but the method name is preceded by a colon (vshard.router:method_name(...)), while for a static router the method name is preceded by a period (vshard.router.method_name(...)).

A static router can be obtained via the vshard.router.static() method and then used like a router created via the vshard.router.new() method.

Примечание

box.cfg is shared among all the routers of a single instance.

Параметры:	name – a router instance name. This name is used as a prefix in logs of the router and must be unique within the instance cfg – a configuration table. See the sample configuration.
Return:	a router instance, if created successfully; otherwise, nil and an error object

vshard.router.call(bucket_id, mode, function_name, {argument_list}, {options})¶

Call the function identified by function-name on the shard storing the bucket identified by bucket_id. See the Processing requests section for details on function operation.

Параметры:

bucket_id – a bucket identifier mode – either a string = „read“|“write“, or a map with mode=“read“|“write“ and/or prefer_replica=true|false and/or balance=true|false. function_name – a function to execute argument_list – an array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.

The mode parameter has two possible forms: a string or a map. Examples of the string form are: 'read', 'write'. Examples of the map form are: {mode='read'}, {mode='write'}, {mode='read', prefer_replica=true}, {mode='read', balance=true}, {mode='read', prefer_replica=true, balance=true}.

If 'write' is specified then the target is the master.

If prefer_replica=true is specified then the preferred target is one of the replicas, but the target is the master if there is no conveniently available replica.

It may be good to specify prefer_replica=true for functions which are expensive in terms of resource use, to avoid slowing down the master.

If balance=true then there is load balancing—reads are distributed over all the nodes in the replica set in round-robin fashion, with a preference for replicas if prefer_replica=true is also set.

Return:

The original return value of the executed function, or nil and error object. The error object has a type attribute equal to ShardingError or one of the regular Tarantool errors (ClientError, OutOfMemory, SocketError, etc.). ShardingError is returned on errors specific for sharding: the master is missing, wrong bucket id, etc. It has an attribute code containing one of the values from the vshard.error.code.* LUA table, an optional attribute containing a message with the human-readable error description, and other attributes specific for the error code.

Examples:

To call customer_add function from vshard/example, say:

vshard.router.call(100,
                   'write',
                   'customer_add',
                   {{customer_id = 2, bucket_id = 100, name = 'name2', accounts = {}}},
                   {timeout = 5})
-- or, the same thing but with a map for the second argument
vshard.router.call(100,
                   {mode='write'},
                   'customer_add',
                   {{customer_id = 2, bucket_id = 100, name = 'name2', accounts = {}}},
                   {timeout = 5})

vshard.router.callro(bucket_id, function_name, {argument_list}, {options})¶

Call the function identified by function-name on the shard storing the bucket identified by bucket_id, in read-only mode (similar to calling vshard.router.call with mode=“read“). See the Processing requests section for details on function operation.

Параметры:	bucket_id – a bucket identifier function_name – a function to execute argument_list – an array of the function’s arguments options – timeout — a request timeout, in seconds.If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:

The original return value of the executed function, or nil and error object. The error object has a type attribute equal to ShardingError or one of the regular Tarantool errors (ClientError, OutOfMemory, SocketError, etc.).

ShardingError is returned on errors specific for sharding: the replica set is not available, the master is missing, wrong bucket id, etc. It has an attribute code containing one of the values from the vshard.error.code.* LUA table, an optional attribute containing a message with the human-readable error description, and other attributes specific for this error code.

vshard.router.callrw(bucket_id, function_name, {argument_list}, {options})¶

Call the function identified by function-name on the shard storing the bucket identified by bucket_id, in read-write mode (similar to calling vshard.router.call with mode=“write“). See the Processing requests section for details on function operation.

Параметры:	bucket_id – a bucket identifier function_name – a function to execute argument_list – an array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:

The original return value of the executed function, or nil and error object. The error object has a type attribute equal to ShardingError or one of the regular Tarantool errors (ClientError, OutOfMemory, SocketError, etc.).

ShardingError is returned on errors specific for sharding: the replica set is not available, the master is missing, wrong bucket id, etc. It has an attribute code containing one of the values from the vshard.error.code.* LUA table, an optional attribute containing a message with the human-readable error description, and other attributes specific for this error code.

vshard.router.callre(bucket_id, function_name, {argument_list}, {options})¶

Call the function identified by function-name on the shard storing the bucket identified by bucket_id, in read-only mode (similar to calling vshard.router.call with mode='read'), with preference for a replica rather than a master (similar to calling vshard.router.call with prefer_replica = true). See the Processing requests section for details on function operation.

Параметры:	bucket_id – a bucket identifier function_name – a function to execute argument_list – an array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:

The original return value of the executed function, or nil and error object. The error object has a type attribute equal to ShardingError or one of the regular Tarantool errors (ClientError, OutOfMemory, SocketError, etc.).

ShardingError is returned on errors specific for sharding: the replica set is not available, the master is missing, wrong bucket id, etc. It has an attribute code containing one of the values from the vshard.error.code.* LUA table, an optional attribute containing a message with the human-readable error description, and other attributes specific for this error code.

vshard.router.callbro(bucket_id, function_name, {argument_list}, {options})¶

This has the same effect as vshard.router.call() with mode parameter = {mode='read', balance=true}.

vshard.router.callbre(bucket_id, function_name, {argument_list}, {options})¶

This has the same effect as vshard.router.call() with mode parameter = {mode='read', balance=true, prefer_replica=true}.

vshard.router.map_callrw(function_name, {argument_list}, {options})¶

The function implements consistent map-reduce over the entire cluster. Consistency means:

• All the data was accessible.
• The data was not migrated between physical storages during the map requests execution.

The function can be helpful if you need to access:

• all the data in the cluster
• a vast number of buckets scattered over the instances in case their individual vshard.router.call() takes up too much time.

The function is called on the master node of each replica set with the given arguments.

Параметры:

function_name – a function to call on the storages (masters of all replica sets) argument_list – an array of the function’s arguments options – timeout – a request timeout, in seconds. The timeout is for the entire map_callrw(), including all its stages. return_raw – the net.box option implemented in Tarantool since version 2.10.0. If set to true, net.box returns the response data wrapped in a MessagePack object instead of decoding it to Lua. For more details, see the Return section below.

Важно

Do not use a big timeout (longer than 1 minute, for instance). The router tries to block the bucket moves to another storage for the given timeout on all storages. On failure, the block remains for the entire timeout.

Return:

• On success: a map with replica set UUIDs (keys) and results of the function_name (values).

  {uuid1 = {res1}, uuid2 = {res2}, ...}
  

  If the function returns nil or box.NULL from one of the storages, it will not be present in the resulting map.

  If the return_raw option is used, the result is a map of the following format: {[replicaset_uuid] = msgpack.object} where msgpack.object is an object that stores a MessagePack array with the results returned from the storage map function.

  The option use case is the same as in using net.box: to avoid decoding of the call results into Lua. The option can be helpful if a router is used as a proxy and results received from a storage are big.

  Example:

  local res = vshard.router.map_callrw('my_func', args, {..., return_raw = true})
  
  for replicaset_uuid, msgpack_value in pairs(res) do
      log.info('Replicaset %s returned %s', replicaset_uuid,
               msgpack_value:decode())
  end
  

  This is an illustration of the option usage. Normally, you don’t need to use return_raw if you call the decode() function.

• On failure: nil, error object, and optional replica set UUID where the error occurred. UUID will not be returned if the error is not related to a particular replica set. For instance, the method fails if not all buckets were found, even if all replica sets were scanned successfully. Handling the result looks like this:

  res, err, uuid = vshard.router.map_callrw(...)
  if not res then
      -- Error.
      -- 'err' - error object. 'uuid' - optional UUID of replica set
      -- where the error happened.
      ...
  else
      -- Success.
      for uuid, value in pairs(res) do
          ...
      end
  end
  

  If the return_raw option is used, the result on failure is the same as described above.

Map-Reduce in vshard can be divided into three stages: Ref, Map, and Reduce.

Ref and Map. map_callrw() combines both the Ref and the Map stages. The Ref stage ensures data consistency while executing the user’s function (function_name) on all nodes. Keep in mind that consistency is incompatible with rebalancing (it breaks data consistency). Map-reduce and rebalancing are mutually exclusive, they compete for the cluster time. Any bucket move makes the sender and receiver nodes inconsistent, so it is impossible to call a function on them to access all the data without vshard.storage.bucket_ref(). It makes the Ref stage intricate, as it should work together with the rebalancer to ensure they do not block each other.

For this, the storage has a special scheduler for bucket moves and storage refs. Storage ref is a volatile counter defined on each instance. It is incremented when a map-reduce request comes and decremented when it ends. Storage ref pins the entire instance with all its buckets, not just a single bucket (like bucket ref).

The scheduler shares storage time between bucket moves and storage refs fairly. The distribution depends on how long and frequent the moves and refs are. It can be configured using the storage options sched_move_quota and sched_ref_quota. Keep in mind that the scheduler configuration may affect map-reduce requests if used during rebalancing.

During the Map stage, map_callrw() sends map requests one by one to many servers. On success, the function returns a map. The map is a set of «key—value» pairs. The keys are replica set UUIDs, and the values are the results of the user’s function—function_name.

Reduce. The Reduce stage is not performed by vshard. It is what the user’s code does with the results of map_callrw().

Примечание

map_callrw() works only on masters. Therefore, you can’t use it if at least one replica set has its master node down.

vshard.router.route(bucket_id)¶

Return the replica set object for the bucket with the specified bucket id value.

Параметры:	bucket_id – a bucket identifier
Return:	a replica set object

Example:

replicaset = vshard.router.route(123)

vshard.router.routeall()¶

Return all available replica set objects.

Return:	a map of the following type: {UUID = replicaset}
Rtype:	a map of replica set objects

Example:

function selectall()
    local resultset = {}
    shards, err = vshard.router.routeall()
    if err ~= nil then
        error(err)
    end
    for uid, replica in pairs(shards) do
        local set = replica:callro('box.space.*space-name*:select', {{}, {limit=10}}, {timeout=5})
        for _, item in ipairs(set) do
            table.insert(resultset, item)
        end
    end
    table.sort(resultset, function(a, b) return a[1] < b[1] end)
    return resultset
end

vshard.router.bucket_id(key)¶

Deprecated. Logs a warning when used because it is not consistent for cdata numbers.

In particular, it returns 3 different values for normal Lua numbers like 123, for unsigned long long cdata (like 123ULL, or ffi.cast('unsigned long long',123)), and for signed long long cdata (like 123LL, or ffi.cast('long long', 123)). And it is important.

vshard.router.bucket_id(123)
vshard.router.bucket_id(123LL)
vshard.router.bucket_id(123ULL)

For float and double cdata (ffi.cast('float', number), ffi.cast('double', number)) these functions return different values even for the same numbers of the same floating point type. This is because tostring() on a floating point cdata number returns not the number, but a pointer at it. Different on each call.

vshard.router.bucket_id_strcrc32() behaves exactly the same, but does not log a warning. In case you need that behavior.

vshard.router.bucket_id_strcrc32(key)¶

Calculate the bucket id using a simple built-in hash function.

Параметры:	key – a hash key. This can be any Lua object (number, table, string).
Return:	a bucket identifier
Rtype:	number

Example:

tarantool> vshard.router.bucket_count()
---
- 3000
...

tarantool> vshard.router.bucket_id_strcrc32("18374927634039")
---
- 2032
...

tarantool> vshard.router.bucket_id_strcrc32(18374927634039)
---
- 2032
...

tarantool> vshard.router.bucket_id_strcrc32("test")
---
- 1216
...

tarantool> vshard.router.bucket_id_strcrc32("other")
---
- 2284
...

Примечание

Remember that it is not safe. See details in bucket_id()

vshard.router.bucket_id_mpcrc32(key)¶

This function is safer than bucket_id_strcrc32. It takes a CRC32 from a MessagePack encoded value. That is, bucket id of integers does not depend on their Lua type. In case of a string key, it does not encode it into MessagePack, but takes a hash right from the string.

Параметры:	key – a hash key. This can be any Lua object (number, table, string).
Return:	a bucket identifier
Rtype:	number

However it still may return different values for not equal floating point types. That is, ffi.cast('float', number) may be reflected into a bucket id not equal to ffi.cast('double', number). This can’t be fixed, because a float value, even being casted to double, may have a garbage tail in its fraction.

Floating point keys should not be used to calculate a bucket id, usually.

Be very careful in case you store floating point types in a space. When data is returned from a space, it is cast to Lua number. And if that value had an empty fraction part, it will be treated as an integer by bucket_id_mpcrc32(). So you need to do explicit casts in such cases. Here is an example of the problem:

tarantool> s = box.schema.create_space('test', {format = {{'id', 'double'}}}); _ = s:create_index('pk')
---
...

tarantool> inserted = ffi.cast('double', 1)
---
...

-- Value is stored as double
tarantool> s:replace({inserted})
---
- [1]
...

-- But when returned to Lua, stored as Lua number, not cdata.
tarantool> returned = s:get({inserted}).id
---
...

tarantool> type(returned), returned
---
- number
- 1
...

tarantool> vshard.router.bucket_id_mpcrc32(inserted)
---
- 1411
...
tarantool> vshard.router.bucket_id_mpcrc32(returned)
---
- 1614
...

vshard.router.bucket_count()¶

Return the total number of buckets specified in vshard.router.cfg().

Return:	the total number of buckets
Rtype:	number

tarantool> vshard.router.bucket_count()
---
- 10000
...

vshard.router.sync(timeout)¶

Wait until the dataset is synchronized on replicas.

Параметры:	timeout – a timeout, in seconds
Return:	true if the dataset was synchronized successfully; or nil and err explaining why the dataset cannot be synchronized.

vshard.router.discovery_wakeup()¶

Force wakeup of the bucket discovery fiber.

vshard.router.discovery_set(mode)¶

Turn on/off the background discovery fiber used by the router to find buckets.

Параметры:	mode – working mode of a discovery fiber. There are three modes: on, off and once

When the mode is on (default), the discovery fiber works during all the lifetime of the router. Even after all buckets are discovered, it will still come to storages and download their buckets with some big period (DISCOVERY_IDLE_INTERVAL). This is useful if the bucket topology changes often and the number of buckets is not big. The router will keep its route table up to date even when no requests are processed.

When the mode is off, discovery is disabled completely.

When the mode is once, discovery starts and finds the locations of all buckets, and then the discovery fiber is terminated. This is good for a large bucket count and for clusters, where rebalancing is rare.

The method is good to enable/disable discovery after the router is already started, but discovery is enabled by default. You may want to never enable it even for a short time—then specify the discovery_mode option in the configuration. It takes the same values as vshard.router.discovery_set(mode).

You may decide to turn off discovery or make it once if you have many routers, or tons of buckets (hundreds of thousands and more), and you see that the discovery process consumes notable CPU % on routers and storages. In that case it may be wise to turn off the discovery when there is no rebalancing in the cluster. And turn it on for new routers, as well as for all routers when rebalancing is started.

vshard.router.info({options})¶

Return information about each instance. Since vshard v.0.1.22, the function also accepts options, which can be used to get additional information.

Параметры:	options – with_services — a bool value. If set to true, the function returns information about the background services (such as discovery, master search, or failover) that are working on the current instance.
Return:

Replica set parameters:

• replica set uuid
• master instance parameters
• replica instance parameters

Instance parameters:

• uri—URI of the instance
• uuid—UUID of the instance
• status—status of the instance (available, unreachable, missing)
• network_timeout—a timeout for the request. The value is updated automatically on each 10th successful request and each 2nd failed request.

Bucket parameters:

• available_ro – the number of buckets known to the router and available for read requests
• available_rw – the number of buckets known to the router and available for read and write requests
• unreachable – the number of buckets known to the router but unavailable for any requests
• unknown – the number of buckets whose replica sets are not known to the router

Service parameters:

• name – service name. Possible values: discovery, failover, master_search.
• status – service status. Possible values: ok, error.
• error – error message that appears on the error status.
• activity – service state. It shows what the service is currently doing (for example, updating replicas).
• status_idx – incrementing counter of the status changes. The ok status is updated on every successful iteration of the service. The error status is updated only when it is fixed.

Example:

tarantool> vshard.router.info()
---
- replicasets:
    ac522f65-aa94-4134-9f64-51ee384f1a54:
      replica: &0
        network_timeout: 0.5
        status: available
        uri: storage@127.0.0.1:3303
        uuid: 1e02ae8a-afc0-4e91-ba34-843a356b8ed7
      uuid: ac522f65-aa94-4134-9f64-51ee384f1a54
      master: *0
    cbf06940-0790-498b-948d-042b62cf3d29:
      replica: &1
        network_timeout: 0.5
        status: available
        uri: storage@127.0.0.1:3301
        uuid: 8a274925-a26d-47fc-9e1b-af88ce939412
      uuid: cbf06940-0790-498b-948d-042b62cf3d29
      master: *1
  bucket:
    unreachable: 0
    available_ro: 0
    unknown: 0
    available_rw: 3000
  status: 0
  alerts: []
...

tarantool> vshard.router.info({with_services = true})
---
<all info from vshard.router.info()>
  services:
    failover:
      status_idx: 2
      error:
      activity: idling
      name: failover
      status: ok
    discovery:
      status_idx: 2
      error: Error during discovery: TimedOut
      activity: idling
      name: discovery
      status: error
...

vshard.router.buckets_info()¶

Return information about each bucket. Since a bucket map can be huge, only the required range of buckets can be specified.

Параметры:	offset – the offset in a bucket map of the first bucket to show limit – the maximum number of buckets to show
Return:	a map of the following type: {bucket_id = 'unknown'/replicaset_uuid}

tarantool> vshard.router.buckets_info()
---
- - uuid: aaaaaaaa-0000-4000-a000-000000000000
    status: available_rw
  - uuid: aaaaaaaa-0000-4000-a000-000000000000
    status: available_rw
  - uuid: aaaaaaaa-0000-4000-a000-000000000000
    status: available_rw
  - uuid: bbbbbbbb-0000-4000-a000-000000000000
    status: available_rw
  - uuid: bbbbbbbb-0000-4000-a000-000000000000
    status: available_rw
  - uuid: bbbbbbbb-0000-4000-a000-000000000000
    status: available_rw
  - uuid: bbbbbbbb-0000-4000-a000-000000000000
    status: available_rw
...

vshard.router.enable()¶

Since vshard v.0.1.21. Manually allow access to the router API, revert vshard.router.disable().

Примечание

vshard.router.enable() cannot be used for enabling a router API that was automatically disabled due to a running configuration process.

vshard.router.disable()¶

Since vshard v.0.1.21. Manually restrict access to the router API. When the API is disabled, all its methods throw a Lua error, except vshard.router.cfg(), vshard.router.new(), vshard.router.enable() and vshard.router.disable(). The error object’s name attribute is ROUTER_IS_DISABLED.

The router is enabled by default. However, it is automatically and forcefully disabled until the configuration is finished, as accessing the router’s methods at that time is not safe.

Manual disabling can be used, for example, if some preparatory work needs to be done after calling vshard.router.cfg() but before the router’s methods are available. It will look like this:

vshard.router.disable()
vshard.router.cfg(...)
-- Some preparatory work here ...
vshard.router.enable()
-- vshard.router's methods are available now

object replicaset_object¶

replicaset_object:call(function_name, {argument_list}, {options})¶

Call a function on a nearest available master (distances are defined using replica.zone and cfg.weights matrix) with specified arguments.

Примечание

The replicaset_object:call method is similar to replicaset_object:callrw.

Параметры:	function_name – function to execute argument_list – array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:	result of function_name on success nil, err otherwise

replicaset_object:callrw(function_name, {argument_list}, {options})¶

Call a function on a nearest available master (distances are defined using replica.zone and cfg.weights matrix) with a specified arguments.

Примечание

The replicaset_object:callrw method is similar to replicaset_object:call.

Параметры:	function_name – function to execute argument_list – array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:	result of function_name on success nil, err otherwise

tarantool> local bucket = 1; return vshard.router.callrw(
         >     bucket,
         >     'box.space.actors:insert',
         >     {{
         >         1, bucket, 'Renata Litvinova',
         >         {theatre="Moscow Art Theatre"}
         >     }},
         >     {timeout=5}
         > )

replicaset_object:callro(function_name, {argument_list}, {options})¶

Call a function on the nearest available replica (distances are defined using replica.zone and cfg.weights matrix) with specified arguments. It is recommended to use replicaset_object:callro() for calling only read-only functions, as the called functions can be executed not only on a master, but also on replicas.

Параметры:	function_name – function to execute argument_list – array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:	result of function_name on success nil, err otherwise

replicaset:callre(function_name, {argument_list}, {options})¶

Call a function on the nearest available replica (distances are defined using replica.zone and cfg.weights matrix) with specified arguments, with preference for a replica rather than a master (similar to calling vshard.router.call with prefer_replica = true). It is recommended to use replicaset_object:callre() for calling only read-only functions, as the called function can be executed not only on a master, but also on replicas.

Параметры:	function_name – function to execute argument_list – array of the function’s arguments options – timeout — a request timeout, in seconds. If the router cannot identify a shard with the specified bucket_id, it will retry until the timeout is reached. other net.box options, such as is_async, buffer, on_push are also supported.
Return:	result of function_name on success nil, err otherwise

vshard.router.master_search_wakeup()¶

Automated master discovery works in its own fiber on a router, which is activated only if at least one replica set is configured to look for the master (the master parameter is set to auto). The fiber wakes up within a certain period. But it is possible to wake it up on demand by using this function.

Manual fiber wakeup can help speed up tests for master change. Another use case is performing some actions with a router in the router console.

The function does nothing if master search is not configured for any replica set.

Return:	none

Router internal API

vshard.router.bucket_discovery(bucket_id)¶

Search for the bucket in the whole cluster. If the bucket is not found, it is likely that it does not exist. The bucket might also be moved during rebalancing and currently is in the RECEIVING state.

Параметры:	bucket_id – a bucket identifier