Starting and stopping instances
This section describes how to manage instances in a Tarantool cluster using the tt utility. A cluster can include multiple instances that run different code. A typical example is a cluster application that includes router and storage instances. Particularly, you can perform the following actions:
- start all instances in a cluster or only specific ones
- check the status of instances
- connect to a specific instance
- stop all instances or only specific ones
To get more context on how the application’s environment might look, refer to Application environment.
Примечание
In this section, a sharded_cluster_crud application is used to demonstrate how to start, stop, and manage instances in a cluster.
To start Tarantool instances use the tt start command:
$ tt start sharded_cluster_crud
• Starting an instance [sharded_cluster_crud:storage-a-001]...
• Starting an instance [sharded_cluster_crud:storage-a-002]...
• Starting an instance [sharded_cluster_crud:storage-b-001]...
• Starting an instance [sharded_cluster_crud:storage-b-002]...
• Starting an instance [sharded_cluster_crud:router-a-001]...
After the cluster has started and worked for some time, you can find its artifacts
in the directories specified in the tt configuration. These are the default
locations in the local launch mode:
sharded_cluster_crud/var/log/<instance_name>/– instance logs.sharded_cluster_crud/var/lib/<instance_name>/– snapshots and write-ahead logs.sharded_cluster_crud/var/run/<instance_name>/– control sockets and PID files.
In the system launch mode, artifacts are created in these locations:
/var/log/tarantool/<instance_name>//var/lib/tarantool/<instance_name>//var/run/tarantool/<instance_name>/
Most of the commands described in this section can be called with or without an instance name.
Without the instance name, they are executed for all instances defined in instances.yaml.
To check the status of instances, execute tt status:
$ tt status sharded_cluster_crud
INSTANCE STATUS PID MODE CONFIG BOX UPSTREAM
sharded_cluster_crud:router-a-001 RUNNING 8382 RW ready running --
sharded_cluster_crud:storage-a-001 RUNNING 8386 RW ready running --
sharded_cluster_crud:storage-a-002 RUNNING 8390 RO ready running --
sharded_cluster_crud:storage-b-001 RUNNING 8379 RW ready running --
sharded_cluster_crud:storage-b-002 RUNNING 8380 RO ready running --
To check the status of a specific instance, you need to specify its name:
$ tt status sharded_cluster_crud:storage-a-001
INSTANCE STATUS PID MODE CONFIG BOX UPSTREAM
sharded_cluster_crud:storage-a-001 RUNNING 8386 RW ready running --
To connect to the instance, use the tt connect command:
$ tt connect sharded_cluster_crud:storage-a-001
• Connecting to the instance...
• Connected to sharded_cluster_crud:storage-a-001
sharded_cluster_crud:storage-a-001>
In the instance’s console, you can execute commands provided by the box module. For example, box.info can be used to get various information about a running instance:
sharded_cluster_crud:storage-a-001> box.info.ro
---
- false
...
To restart an instance, use tt restart:
$ tt restart sharded_cluster_crud:storage-a-002
After executing tt restart, you need to confirm this operation:
Confirm restart of 'sharded_cluster_crud:storage-a-002' [y/n]: y
• The Instance sharded_cluster_crud:storage-a-002 (PID = 2026) has been terminated.
• Starting an instance [sharded_cluster_crud:storage-a-002]...
To stop the specific instance, use tt stop as follows:
$ tt stop sharded_cluster_crud:storage-a-002
You can also stop all the instances at once as follows:
$ tt stop sharded_cluster_crud
• The Instance sharded_cluster_crud:storage-b-001 (PID = 2020) has been terminated.
• The Instance sharded_cluster_crud:storage-b-002 (PID = 2021) has been terminated.
• The Instance sharded_cluster_crud:router-a-001 (PID = 2022) has been terminated.
• The Instance sharded_cluster_crud:storage-a-001 (PID = 2023) has been terminated.
• can't "stat" the PID file. Error: "stat /home/testuser/myapp/instances.enabled/sharded_cluster_crud/var/run/storage-a-002/tt.pid: no such file or directory"
Примечание
The error message indicates that storage-a-002 is already not running.
The tt clean command removes instance artifacts (such as logs or snapshots):
$ tt clean sharded_cluster_crud
• List of files to delete:
• /home/testuser/myapp/instances.enabled/sharded_cluster_crud/var/log/storage-a-001/tt.log
• /home/testuser/myapp/instances.enabled/sharded_cluster_crud/var/lib/storage-a-001/00000000000000001062.snap
• /home/testuser/myapp/instances.enabled/sharded_cluster_crud/var/lib/storage-a-001/00000000000000001062.xlog
• ...
Confirm [y/n]:
Enter y and press Enter to confirm removing of artifacts for each instance.
Примечание
The -f option of the tt clean command can be used to remove the files without confirmation.
Tarantool supports loading and running chunks of Lua code before starting instances.
To load or run Lua code immediately upon Tarantool startup, specify the TT_PRELOAD
environment variable. Its value can be either a path to a Lua script or a Lua module name:
To run the Lua script
preload_script.luafrom thesharded_cluster_cruddirectory, setTT_PRELOADas follows:$ TT_PRELOAD=preload_script.lua tt start sharded_cluster_crud
Tarantool runs the
preload_script.luacode, waits for it to complete, and then starts instances.To load the
preload_modulefrom thesharded_cluster_cruddirectory, setTT_PRELOADas follows:$ TT_PRELOAD=preload_module tt start sharded_cluster_crud
Примечание
TT_PRELOADvalues that end with.luaare considered scripts, so avoid module names with this ending.
To load several scripts or modules, pass them in a single quoted string, separated by semicolons:
$ TT_PRELOAD="preload_script.lua;preload_module" tt start sharded_cluster_crud
If an error happens during the execution of the preload script or module, Tarantool reports the problem and exits.